ChangingYourCompactor’sColour

The colour panel on the front of your compactor’s drawer reverses to another colour.

To change the colour of your compactor’s front panel, follow the directions below. All you need is a medium- sized screwdriver.

1. Slide drawer out.

2. Remove two screws shown.

3. Remove handle.

IMPORTANT: When you are changing front panels, handle carefully to avoid cuts.

4. Remove the colour panel and reverse. Be careful - edges may be sharp.

OR

Place extra panel at front with desired colour showing.

5. Make sure panel(s) are all the way down.

6. Be sure to replace cardboard spacer in its former position.

7. Replace handle and screws.

8. Slide drawer back in.

OPTION: Match your kitchen’s colour scheme by applying paint, wallpaper, or other material to the colour panel.

OR

Install a custom-made flat or raised panel in place of the colour panel(s) and spacer. A panel 5.6 mm thick is required. Decorative trim or raised panel sections must be 8 mm from all edges of outer section.

15

- ..-.

Page 16
Image 16
Whirlpool 220-240~volt, 50-Hz Models manual ChangingYourCompactor’sColour