Use & Care
Information
Electrical Shock Hazard
l To prevent the risk of electrical shock or injury, be sure to disconnect power before cleaning or servicing.
l If any electrical problem becomes evident during use, disconnect power to hood at fuse or breaker box.
Failure to follow these instructions could result in electrical shock.
Filter/light lens:
For best results, remove and clean often. To remove filter/light lens:
Pull firmly on filter tab to remove filter/light lens from range hood.
To clean filter/light lens:
Place filter/light lens in dishwasher or hot sudsy water to clean.
Turn filter/light lens so that charcoal filter pod is facing up. Lift tabs and remove charcoal filter pod. Discord charcoal filter pad. Place filter/light lens in dishwasher or hot sudsy water to clean. Lift tabs and place new charcoal filter pod in filter/light lens.
New charcoal filter pods, Port No. 883151, ore available from your dealer.
To reinstall filter/light lens:
Place edge of filter/light lens in opening so that right side is above flange and tab faces downward. Press filter/light lens into position.
To clean fan motor:
Every three years lubricate each motor bearing with a few drops of oil to help prolong motor life.
Clean exterior of motor with a damp cloth and
Exterior surfaces
Clean the range hood with a mild detergent and soft cloth. Do Not use abrasive cleansers or steel wool pods.
Light
Do Not use bulb larger than 60 watts in light socket.
Light bulb is not included.
Operation
of range hood
For best results, turn range hood fan ON at beginning of cooking and allow it to run until all smoke and odors ore removed from room.
To turn fan ON, HIGH and LOW:
Turn fan control to turn fan to HIGH, LOW and OFF. Speed may be increased or decreased
To turn range hood light ON and OFF: Turn light control to turn light ON or OFF. Light may be turned to OFF or ON anytime during range hood operation.
I | OFF | OFF | I |
:
fan cdntrol | light kontrol |
Panel E