Towels
Select cycle according to fabric type. Some towels, particularly those made of a blend of synthetic fibers and natural fibers (polyester and cotton blends), may shed more lint than o’her towels causing your dryer’s lint screen to get full faster. Be sure to remove lint from the dryer lint screen before and after drying new towela ,.
Washable | knits | Do not overdry | knits. Overdrying can cau:i e shrinking and static cling. |
|
| 1. Select cycle | according to fabric and colistruction. |
2. Turn synthetics and blends inside out vrhen drying to avoid pilling.
3. Remove cotton and rayon knits while s ill slightly damp. Stretch into
shape and lay flat to finish drying.
Using dryer fabric softeners
,_
Dryer fabric softeners are recommended for reducing static cling (static can also be re- duced by not overdrying) and for softening fabrics. Always follow package instructions carefully.
lPut fabric softener sheet on top of the load before starting the dryer. Do not add a fabric softener sheet after the cycle has started. Instant heat can cause the fabric softener to spot fabrics.
l
l
Clear,
Some fabric :;ofteners can clog the lint screen and I, ow drying. Use fabric softeners labeled as dr /er safe.
Saving energy
l
l
l
l
Use your automatic cycle to dry most loads. Dry only full loads without overdrying.
Avoid overloading dryer, adding wet items to a partly dried load, or opening the door unnecessarily.
Plan your laundry to dry one load after another. A warm dryer shortens drying time.
lShorten dryir g times by exhausting dryer properly and cleaning exhaust duct and outside exha Jst hood as needed.
- Sort loads :byfabric weight and type.
Vacation care
1.Unplug power supply cord or turn off electrical power supply.
2.Clean lint screen.
18
