End of cycle signal
(on some models)
The dryer sounds a signal to let you know when the cycle is finished. The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed from
the dryer as soon as it stops.
l
l
On some dryers, the end of cycle signal is not adjustable.
On other dryers, the end of cycle signal can be turned On or Off by a selector. The end of cycle On/Off selector is part of the Start Button on some models. The various types of selectors are described in the chart below.
Using End of cycle signal and FINISH GUARD@ feature
(on some models)
If your dryer has the end of cycle signal and/or FINISH GUARD feature, they may be turned On or Off as shown below.
NOTE: Unless you turn Off the FINISH GUARD feature, it operates at the end of the cycle.
SElTiNG T SEPARATE
KNOBS
End of Cycle
Signal
OFF
Finish Guard
OFF
End of Cycle
Signal
OFF
Finish Guard
ON
End of Cycle
Signal
ON
Finish Guard
OFF
End of Cycle
Signal
ON
Finish Guard
ON
Your model may have one of the following:
l Separate knob selectors for end of cycle signal and FINISH GUARD feature.
l CLEAN TOUCHm pushbutton pad for both features.
CLEAN TOUCH
OR SELECTOR
11
