Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.
settings
lAdjust the Refrigerator Control first.
lWail at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
CONDlTION:
Refrigerator section too warm
Freezer section too warm
Refrigerator section too cold
Ice not made fast enough
Both sections too warm
REASON:
lDoor opened often
lLarge amount of food added l Room temperature too warm
lDoor opened often
lLarge amount of food added aVery cold room temperature
(can’t cycle often enough)
lControls not set correctly for your conditions
l Heavy be usage
lVery cold raom temperature (can’t cycle often enough)
lDoor opened often
lLarge amount of food added every warm or very cold room
teqeratures
RECOMMENDED CONTROL SETTINGS:
RefrigeratorFreezer
42
34
24
44
44
Removing the drop-in door trim pieces
(on some models)
To remove the trim place:
1.Remove all items from the shelf.
2.Pull straight up on the trim piece at each end.
To replace the trim piece:
1.Locate each end of the trim piece above the trim pocket opening.
2.Push the trim piece straight down until it stops.
3. Replace items on the shelf. | 9 |
|
