Whirlpool 3ET22DKXDN00 manual Iii

To remove the shelf:

1.Remove all items from the shelf.

2.Hold back of shelf with one hand.

3.Lift front of shelf to 45” angle.

4.Lower shelf slightly to release shelf from upper channel of track. Then pull shelf straight out.

NOTE: Shelf is heavy. Make sure you use both hands when removing shelf.

To remove shelf track:

1.Lift both sides of track slightly.

2.Pull track straight out.

To replace shelf track:

1.Guide track hooks into the shelf support slots on the back wall of the cabinet. NOTE: Make sure both track hooks are in slots and that the slots are parallel to each other.

2.Push track backward and down.

3.Check that track is completely seated in the shelf supports.

To reinstall shelf:

1.Hold shelf at front and back.

2.Tilt front of shelf up to a 45” angle to track.

3.Insert both rear shelf slides into upper channel of track.

4.Lower front of shelf to a level position.

Hold with both hands

and lift front to 45” angle.

II

III

Hold both sides and lift up and out.

Make sure both sets of hooks are in support slots.

Shelf

/suPPoe

Upper channel

NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.

slides into upper channel of track.

10