Using Your Dishwasher
The drawings in this book may vary slightly from your dishwasher model. They are designed to show the different features of all the models covered by this book.
NOTE: Your model may not include all the features shown.
fold down shelf (on some model
Silverware bask (on some models)
Third level wash (on some models)
Before starting dishwasher
1.Read “ImportantSafety Instructions” on page 2 before starting your dishwasher.
2.Properly load the top and bottom racks, and silverware basket. (See pages 7 and 8.)
3.Spin the lower spray arm to make sure nothing will stop it from turning freely.
4.Add detergent. Seepage 8.
5.Check rinse agent dispenser. See page 9.
6.Push door firmly when closing and it will automatically latch.
7.Run hot water at sink nearest dishwasher until it is hot. Turn it
Off.
Water Inlet opening
Bottom rack
Heating element
SlIverware basket (on some models)
--Filter system screen (not shown)
lIverware basket
Lower spray arm
Overfill protector
etergent dispenser
1 y | Access panel |
h Door color panel
Model and serial
klnse agent dispenser number label (on dght side)
Starting dishwasher
1.Select a drying option. (Select ENERGYSAVERwhen using the Rinse & Hold Cycle.)
2.Select any other desired options that are available.
Model6 with RESET OPTIONS Button - Options may be changed or cancelled by pushing the RBSET OPTIONSButton, then pushing new Option Selector Button(s).
All other models - Options may be changed or cancelled by pushing another Option Selector Button.
3.Turn the Cycle Control Knob clockwise to point to a desired cycle. You will feel a definite stop at each cycle mark. The dishwasher will automatically start that cycle.
NOTE: If the door is latched, you will hear cycles start and stop as the knob passes each cycle mark. This is normal and will not hurt the dishwasher. If you prefer, you can set cycles with the door unlatched.
Page 3