Whirlpool 408 Pots & Pans cycle, Heavy Wash cycle, Hi-Temp Washing option, Using Delay Hours

Cycles and options (models with seven buttons)

Pots & Pans cycle Rinse & Hold cycle

A double wash where water is heated during the first wash and rinse for maximum cleaning of cooked-on or baked-on foods.

Push the POTS& PANSCycle Selector Button and select the mark next to POTS

&PANSwith the Cycle Control Knob. The cycle sequence will be:

Wash+Rinse+Rinse+WashRinse+Rinse+

Rinse+Dry+Off

Heavy Wash cycle

A double wash for heavily soiled loads.

Push the HEAVY WASH Cycle Selector Button. Select the mark next to HEAVY WASHwith the Cycle Control Knob. The cycle sequence will be:

WashRinse+Rinse+WashRinse+Rinse+

Rinse+Dry+Off

Normal Wash cycle

A double wash for normal, everyday loads. (The Energy Guide Label data is based on this cycle.)

Push the NORMAL Cycle Selector Button and select the mark next to NORMAL WASHwith the Cycle Control Knob. The cycle sequence will be:

Wash+Rinse+Wash+Rinse+Rinse-r Rinse-+Dry+Off

Light Wash cycle

A single wash for pre-rinsed or lightly soiled loads.

Push the LIGHT WASH Cycle Selector Button and select the mark next to LIGHT WASH and with the Cycle Control Knob. The cycle sequence will be:

Rinse+Wash+FhnseRinseRinse+Dry+Off

For rinsing a few items to be washed one or more days later.

Select the mark next to RINSE& HOLD with the Cycle Control Knob. Push the ENERGYSAVERDRY Option Selector Button. Using the Heat Dry option may cause food to bake on dishes. The cycle sequence will be:

Rinse+Rinse+Off

Energy Saver Dry option

Air in the dishwasher is automatically heated during the “dry”part of all cycles.

If the ENERGYSAVERDRY Option Selector Button is pushed, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Someitems (such as plastics) may need towel drying.

For best drying results, use a liquid rinse agent.

Hi-Temp Washing option

When the HI-TEMP WASHING Option Selector Button is pushed, water is heated during the first wash in the Heavy Wash cycle and the final rinse in all cycles.

Using DELAY HOURS

1.Push desired Cycle Selector Button.

2.Push desired Option Selector Buttons.

3.Turn Cycle Control Knob clockwise to the number of hours you want the dishwasher to delay before the selected cycle starts.

4.Close and latch the door.

NOTE:

nYou can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.

nThe Light Wash cycle can not be delayed.

Page6