Whirlpool 4VED27DQ, 4VED29DQ Using the automatic ice maker, Dispenser light

The water dispenser

Chilled water comes from a tank behind the meat drawer. It holds approximately 1.5 L (1% quarts).

When you hook up the refrigerator for the first time, press the water dispenser bar with a glass or jar until you draw and discard 1.9 to

2.8L (2 to 3 quarts). The water you draw and discard rinses the tank and pipes. Allow several hours to chill a new tankful.

NOTE: The small tray beneath the dispenser evaporates small spills. There is no drain in this tray. Do not pour water into it.

To dispense water:

1.Press a sturdy glass against the water dispenser bar.

2.Remove the glass to stop dispensing.

NOTE: Dispense enough water every week to maintain a fresh supply.

The dispenser light

To turn on night light, slide dispenser LIGHT switch to the left. See page 16 for directions for changing the dispenser light bulb.

Using the automatic ice maker

Here are a few things you will want to know about your automatic ice maker:

l The ON/OFF lever is a wire signal arm. Down . . . to make ice automatically.

up . . . to shut off the ice maker.

NOTE: Do not turn ice maker on until it is connected

tions for ice maker water supply hook up are attached to the back of the refriaerator

lIt is normal for ice crescents to be attached by a corner. They break apart easily.

l The ice maker will not operate until the freezer is cold enough to make ice. This can take overnight.

l If ice is not being made fast enough and more ice is needed, turn the Refrigerator Control toward a higher number. Wait a day and, if necessary, turn the Freezer Control toward C.

Raise signal arm to stop ice maker.

Lower signal arm to start ice maker.

13