10

Timer Delay

To set the Timer for a 1- to 24-hour delay until the air

conditioner turns off (the air conditioner must be On):

1. Press the TIMER plus button. Display will show remaining
hours before air conditioner w ill turn off.
2. Press the plus or minus button to adjust the delay ti me (1 to
24 hours).
3. To turn off the Timer, press the plus or minus button until no
delay time appears in the display.

To set the Timer to turn on the air conditioner, keeping

previous settings:

1. Turn off air conditioner.
2. Press the TIMER plus button. Display will show remaining
hours before air conditioner w ill turn on.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. To turn off the Timer, press the plus or minus button until no
delay time appears in the display.

To set the Timer to turn on the air conditioner, changing

the previous settings:

1. Turn on air conditioner.
2. Adjust Mode to Fan, Cool, Heat (heating models only) or
Auto.
NOTE: The temperature and fan speed cannot be set when
using Auto mode.
3. Adjust Fan Speed to High, Med or Low.
4. Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5. Wait 3 seconds before turning off air conditioner.
6. Press the TIMER plus button. Display will show remaining
hours before air conditioner w ill turn on.
7. Press the plus or minus button to change delay time (1 to
24 hours).
8. To turn off the Timer, press the plus or minus button until no
delay time appears in the display.

To clear Timer delay program:

NOTE: Air conditioner can be eit her on or off.
Press the plus or minus button until no delay time appears in the
display.

To see or change the delay time (in hours):

■The remaining time will display as long as the Timer is
activated.
■Press the plus or minus button to increase or decrease the
time.

Sleep Mode

When Sleep mode is activated, the set temperature will
automatically increase at intervals until the timer turns off the
Sleep mode.
1. Press POWER to start the air conditioner.
2. Press MODE to choose Cool or Heat (heating models only).
3. Press SLEEP.
4. Press the Timer plus or minus button to change delay time
(0.5 to 24 hours).
5. To cancel the Sleep mode, press SLEEP again.
Using the Remote Control
NOTE: Remote control may vary in appearance
NOTES:
■Two AAA batteries (included) power the remote control. Do
not use rechargeable batteries. Replace batteries after
6 months of use, or when the remote control starts to lose
power.
■To operate the air conditioner with the remote control, aim the
remote control at the signal receptor from no more than 23 ft
(7 m) away.

To Turn the Air Conditioner On or Off

Press POWER.
SET TIME
ON
OFF
SLEEP
MODE
FAN
TIMER
DRY
SLEEP
Hr
Min
+ºF -ºF
SEND
POWER
POWER