SUPPO button
Pull out to the
stop, liff the front and pull again.
Lift the cover
front, then the back.
Adjusting the door bins
To remove:
1.Lift bin up.
2.Pull bin straight out.
To replace:
1.Slide bin in above desired support button.
2.Push bin down until it stops.
Removing the crispers and crisper cover To remove the crispers:
1.Slide crisper straight out to the stop.
2.Lift the front.
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the cover:
1.Push up glass insert from bottom, then slide out with both hands.
2.Lift front of cover frame.
3.Lift out cover frame by pulling up and out.
4.Remove metal cover support.
To replace the cover:
1.Replace metal cover support on wall supports in front section of cabinet.
2.Fit back of cover frame into notch supports on walls of refrigerator, then lower into place.
3.Slide back of glass insert into place, then lower front.
Adjusting the crisper humidity control
You can control the amount of humidity in the
. The control can be adjusted to any setting between LOW and HIGH.
. LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
lHIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
