Removing the base grille
To remove the grille:
| 1. Open the freezer door. | |||
| 2. | Pull grille out. |
| |
| 3. | Do not remove | Tech Sheet fastened behind | |
ondenser coils |
| grille. |
|
|
To replace | grille: |
| ||
|
| |||
| 1. Line up grille support tabs with metal clips. | |||
| 2. | Push firmly to snap into place. | ||
| 3. | Close the door. |
| |
| See cleaning instructions for defrost pan and | |||
| condenser coils on page 11. | |||
| Reversing | the door swing | ||
| You can change the hinges on your refrigerator | |||
| so the doors open the other way. Refer to the | |||
| instruction sheet included with your refrigerator. | |||
| Ice compartment | door | ||
| Pull the ice compartment door panel out from the | |||
| bottom and slide it to the rear. | |||
Ice cube trays
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.
To remove ice:
1.Hold tray at both ends.
2.Twist slightly.
9
