Whirlpool CS25AFXKQ01 Power Interruptions, Vacation and Moving Care, Crisper Lights, Vacations

Models: CS25AFXKT04 CS25AFXKT03 7SS25AFXLQ00 7GS6SHAXKT02 CS22AFXKB05 CS22AFXKS05 CS22AFXKT04 CS22AFXKQ03 CS22AFXKQ04 CS22AFXKQ00 CS22AFXKQ01 CS22AFXKT05 CS22AFXKT03 CS25AFXKT00 CS25AFXKQ03 CS25AFXKQ00 CS25AFXKQ04 CS25AFXKQ02 CS22AFXKQ05 CS25AFXKT02 CS22AFXKT01 CS20TKXNQ00 CS25AFXKQ01 CS25AFXKT01 7ED5FTGXKT00 7ED5GHGXMQ00 7ED5FTGXKT02 7ED5FTGXKT01 7GS6SHAXKQ02 7GS6SHAXKB00 7GS6SHAXKS01 7ED7FHGXKQ00 7GS6SHAXKS00 7GS6SHAXKQ00 7GS6SHAXKS02 7GS6SHAXKT01 7GS6SHAXKB02 7GS6SHAXKT00 7GS6SHAXKB01 7ED7FHGXKQ01 7GS6SHAXKQ01

1 24
Download 24 pages 13.07 Kb
Page 18
Image 18
Crisper Lights

Crisper Lights

If necessary, remove the top crisper drawer to access the crisper light shield. Remove the light shield by lifting the ends out of the brackets as shown.

Replace the light shield by inserting the ends into the brackets. If necessary, replace the top crisper drawer.

Upper Freezer Light (on some models)

Style 1

Remove light shield by grasping the top center of the shield and pulling forward while turning it slightly to one side. If necessary, remove top crisper drawer to gain access to the crisper light shield.

Replace the light shield by inserting the tabs on one end into the slotted holes in the refrigerator or freezer liner. Then, carefully bend the shield at the center to insert the tabs on the other end.

Style 2

Remove the light shield by squeezing the sides of the light shield in toward the center while pulling the shield forward as shown.

Replace the light shield by fitting the tabs into the slotted holes in the freezer liner. Push in the shield until it snaps into place.

Lower Freezer Light (on some models)

Style 1 - Beneath Ice Bin

Remove the light shield by grasping the sides and squeezing in toward the center. Once the side hooks of shield are free from the freezer lining, pull down the shield.

Replace the light shield by squeezing the sides toward the center and inserting the side hooks into the slotted holes. Once the side hooks are in place, snap the front tab into the slotted hole.

Style 2 - Behind Freezer Basket

Depending on your model, remove the top freezer basket or top freezer basket shelf. Remove light shield by removing the Phillips screw on the top of the shield. Carefully rotate the shield until the left tab can be gently pulled from the freezer wall.

Replace the light shield by inserting the left tab into the freezer wall. Align top tab with screw hole and replace screw.

Power Interruptions

If the power will be out for 24 hours or less, keep both refrigerator doors closed to help food stay cold and frozen.

If the power will be out for more than 24 hours, do one of the following:

Remove all frozen food and store it in a frozen food locker.

Place 2 lbs (907 g) of dry ice in the freezer for every cubic foot (28 L) of freezer space. This will keep the food frozen for 2 to 4 days.

If neither a food locker nor dry ice is available, consume or can perishable food at once.

REMEMBER: A full freezer stays cold longer than a partially filled one. A freezer full of meat stays cold longer than a freezer full of baked goods. If you see that food contains ice crystals, it may be refrozen, although the quality and flavor may be affected. If the condition of the food is poor, dispose of it.

Vacation and Moving Care

Vacations

If you choose to leave the refrigerator on while you’re away:

1.Use up any perishables and freeze other items.

2.If your refrigerator has an automatic ice maker:

Raise wire shutoff arm to OFF (up) position or move the switch to the OFF (right) setting.

Shut off water supply to the ice maker.

3.Empty the ice bin.

If you choose to turn the refrigerator off before you leave:

1.Remove all food from the refrigerator.

2.If your refrigerator has an automatic ice maker:

Turn off the water supply to the ice maker at least one day ahead of time.

When the last load of ice drops, raise the wire shutoff arm to the OFF (up) position or move the switch to the OFF (right) setting.

3.Depending on your model, turn the Thermostat Control or Refrigerator Control to OFF. See the “Using the Controls” section.

4.Clean refrigerator, wipe it, and dry well.

5.Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up.

18

Page 18
Image 18
Whirlpool CS25AFXKQ01 manual Power Interruptions, Vacation and Moving Care, Crisper Lights, Style 2 - Behind Freezer Basket