Whirlpool CS25AFXKQ02, 7GS6SHAXKQ01 manual Product Data Sheets, Base Grille Water Filtration System

Models: CS25AFXKT04 CS25AFXKT03 7SS25AFXLQ00 7GS6SHAXKT02 CS22AFXKB05 CS22AFXKS05 CS22AFXKT04 CS22AFXKQ03 CS22AFXKQ04 CS22AFXKQ00 CS22AFXKQ01 CS22AFXKT05 CS22AFXKT03 CS25AFXKT00 CS25AFXKQ03 CS25AFXKQ00 CS25AFXKQ04 CS25AFXKQ02 CS22AFXKQ05 CS25AFXKT02 CS22AFXKT01 CS20TKXNQ00 CS25AFXKQ01 CS25AFXKT01 7ED5FTGXKT00 7ED5GHGXMQ00 7ED5FTGXKT02 7ED5FTGXKT01 7GS6SHAXKQ02 7GS6SHAXKB00 7GS6SHAXKS01 7ED7FHGXKQ00 7GS6SHAXKS00 7GS6SHAXKQ00 7GS6SHAXKS02 7GS6SHAXKT01 7GS6SHAXKB02 7GS6SHAXKT00 7GS6SHAXKB01 7ED7FHGXKQ01 7GS6SHAXKQ01

1 24
Download 24 pages 13.07 Kb
Page 23
Image 23
PRODUCT DATA SHEETS

PRODUCT DATA SHEETS

Base Grille Water Filtration System

Model WF-NL300/NL300 capacity 300 Gallons (1136 Liters)

Model WF-L500/L500 capacity 500 Gallons (1893 Liters)

System tested and certified by NSF International against ANSI/NSF

Standard 53 for the reduction of Lead; and against Standard

ANSI/NSF 42 for the reduction of Taste and Odor, Chlorine Class I.

This system has been tested according to ANSI/NSF 42/53 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in ANSI/NSF 42/53.

Contaminant

Average

Influent Challenge

Product

Average %

Max. Permissible

Max.

Min. %

Reduction

Influent

Concentration

Water

Reduction

Concentration

Effluent

Reduction

 

mg/L

 

mg/L

 

mg/L

mg/L

 

 

 

 

 

 

 

 

 

Lead: @ pH 6.5

0.16

0.15 mg/L ± 10%

0.0024

98.4

0.01

.005

97

Lead: @ pH 8.5

0.17

0.15 mg/L ± 10%

0.0045

97.4

0.01

.009

95

 

 

 

 

 

 

 

 

Substance Reduction

 

 

 

 

Min. Required %

 

 

 

 

 

 

 

reduction

 

 

 

 

 

 

 

 

 

 

Chlorine, Taste/Odor

2.0

2.0 mg/L ± 10%

0.14

93.0

75%

N/A

N/A

 

 

 

 

 

 

 

 

Test Parameters: pH = 7.5 ± 0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 63°F (17.2°C).

It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to perform as advertised.

Using Replacement Cartridge NL300 - Model WF-NL300: The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in ANSI/NSF 42 and 53. Change cartridge at least every 6-9 months. Use replacement cartridge NL 300, part# 4392857. 2003 suggested retail price of $29.95 U.S.A./ $39.95 Canada. Prices are subject to change without notice.

Using Replacement Cartridge L500 - Model WF-L500: The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in ANSI/NSF 42 and 53. The filter monitor system measures the amount of water that passes through the filter and alerts you to replace the filter. When 90% of the filter’s rated life is used, the filter indicator light changes from green to yellow. When 100% of the filter’s rated life is used, the filter indicator light changes from yellow to red, and it is recommended that you replace the filter. Use replacement cartridge L500, part# 4392857. 2003 suggested retail price of $29.95 U.S.A./$39.95 Canada. Prices are subject to change without notice.

The product is for cold water use only.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Refer to the “Assistance or Service” section for parts and service availability or for the Manufacturer’s name, address and telephone number.

Refer to the “Warranty” section for the Manufacturer’s limited warranty.

Note that while the testing was performed under standard laboratory conditions, actual performance may vary. Systems must be installed and operated in accordance with manufacturer’s recommended procedures and guidelines.

Application Guidelines/Water Supply Parameters

Water Pressure

30 - 120 psig (207 - 827 kPa)

Water Temperature

33° - 100°F (0.6° - 37.8° C)

Rated Service Flow

0.5 gpm (1.9 Lpm)

 

 

®NSF is a registered trademark of NSF International.

23

Page 23
Image 23
Whirlpool CS25AFXKQ02, 7GS6SHAXKQ01, 7ED7FHGXKQ01, 7GS6SHAXKB01 Product Data Sheets, Base Grille Water Filtration System