VentingRequirements

WARNING

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS.

IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling or a concealed space of a building.

If using an existing vent system

■Clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint.

■Replace any plastic or metal foil vent with rigid or flexible heavy metal vent.

■Review Vent system chart. Modify existing vent system if necessary to achieve the best drying performance.

■Do not install flexible metal vent in enclosed walls, ceilings or floors.

Elbows

45° elbows provide better airflow than 90° elbows.

GoodBetter

Clamps

■Use clamps to seal all joints.

■Exhaust vent must not be connected or secured with screws or other fastening devices that extend into the interior of the duct. Do not use duct tape.

Clamp

Exhaust

Recommended hood styles are shown here.

B

A

If this is a new vent system

Vent material

■Use a heavy metal vent. Do not use plastic or metal foil vent.

■4" (10.2 cm) heavy metal exhaust vent and clamps must be used.

4"

10.2 cm

4"

(10.2 cm)

4" (10.2 cm)

A. Louvered hood style

B. Box hood style

The angled hood style (shown here) is acceptable.

4"

(10.2 cm)

4" (10.2 cm) heavy metal exhaust vent

Rigid metal vent

■For best drying performance, rigid metal vents are recommended.

■Rigid metal vent is recommended to avoid crushing and kinking.

Flexible metal vent

■Flexible metal vents are acceptable only if accessible for cleaning.

■Flexible metal vent must be fully extended and supported when the dryer is in its final location.

■Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance.

2½" (6.4 cm)

■An exhaust hood should cap the vent to keep rodents and insects from entering the home.

■Exhaust hood must be at least 12" (30.5 cm) from the ground or any object that may be in the path of the exhaust (such as flowers, rocks or bushes, snow line, etc.).

■Do not use an exhaust hood with a magnetic latch.

Improper venting can cause moisture and lint to collect indoors, which may result in:

Moisture damage to woodwork, furniture, paint, wallpaper, carpets, etc.

Housecleaning problems and health problems.

7

Page 6 Page 8
Page 7
Image 7
Whirlpool 8565592B manual VentingRequirements, If using an existing vent system, If this is a new vent system Vent material
Page 6 Page 8

8565592B specifications

The Whirlpool 8565592B is a versatile and efficient appliance designed to enhance your laundry experience. As a part of Whirlpool's commitment to innovation and quality, this model boasts a range of features that set it apart in the competitive market of washing machines.

One of the standout features of the Whirlpool 8565592B is its impressive load capacity. It allows users to wash larger loads in a single cycle, saving both time and energy. This is particularly beneficial for families or individuals who often have bulky items such as bedding or towels to clean. The machine’s space-saving design is also a significant advantage, making it suitable for various laundry room sizes.

Equipped with advanced washing technologies, the 8565592B ensures optimal cleaning performance. Its Adaptive Wash Technology automatically senses the needs of each load and adjusts the wash motions and time accordingly. This not only enhances cleaning efficiency but also minimizes the wear and tear on fabrics. Moreover, the machine features a variety of wash cycles and settings, allowing users to customize their washing experience based on fabric type and soil level.

Energy efficiency is a pivotal characteristic of the Whirlpool 8565592B. Designed to consume less water and electricity, it helps users save on utility bills while contributing to an eco-friendly household. The unit may come with Energy Star certification, signifying that it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the Department of Energy.

Another notable feature is the intuitive control panel, which simplifies operation. With clearly labeled buttons and a user-friendly interface, users can easily navigate through different settings without confusion. This enhances the overall user experience and accommodates varying levels of technological familiarity among users.

The design of the Whirlpool 8565592B combines functionality with aesthetics. Its sleek and modern appearance fits seamlessly into any laundry space, making it a stylish addition to your home. Additionally, the durable materials used in its construction ensure long-lasting performance, making it a worthwhile investment.

In summary, the Whirlpool 8565592B is more than just a washing machine; it is a reliable partner in maintaining the cleanliness and care of your garments. With its large load capacity, advanced technologies, energy efficiency, and user-friendly design, it caters to the diverse needs of contemporary households, ensuring that laundry days are less of a chore and more of a breeze.
Top Page Image Contents