See following table for recommended cycles and temperature settings.
See following table for recommended cycles and temperature settings.
Fabric Type | Cycle | Temperature |
|
| Setting |
|
|
|
REGULAR |
|
|
|
|
|
Heavy cottons and denims | More Dry | Normal |
|
|
|
Cottons and linens | Normal | Normal |
|
|
|
SYNTHETICS |
|
|
|
|
|
White and colorfast | Normal | Low |
permanent press |
|
|
|
|
|
White and colorfast items | Less Dry | Low |
that require ironing |
|
|
|
|
|
Polyester/acrylic blends, | Damp Dry | Low |
rayon, acetate |
|
|
Fabric Type | Time | Temperature |
| (minutes) | Setting |
|
|
|
Heavy cottons and denims | 60 | Normal |
|
|
|
Cottons and linens | 40 | Normal |
|
|
|
White and colorfast | 40 | Low |
permanent press |
|
|
|
|
|
White and colorfast items | 40 | Low |
that require ironing |
|
|
|
|
|
Polyester/acrylic blends, | 40 | Low |
rayon, acetate |
|
|
|
|
|
Washable silk and nylon | 40 | Low |
End of Cycle Signal
Washable silk and nylon | Damp Dry | Low |
Timed Dry
Use this cycle to get up to 60 minutes of heated drying time or to complete drying if items are still damp after the automatic cycle. Timed Dry is also useful for:
■Heavyweight items and work clothes that require a long drying time.
■Lightweight items, such as lingerie, blouses and knits that require a short drying time.
The dryer sounds a signal to let you know when the cycle is complete. The signal is not adjustable and cannot be turned off. The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed promptly at the end of the cycle.
Anti-Wrinkle
During
DRYER CARE
Cleaning the Dryer Location
Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from dryer.
Place dryer at least 18 inches (46 cm) above the floor for a garage installation.
Failure to do so can result in death, explosion, or fire.
Cleaning the Lint Screen
Every load cleaning
The lint screen is located in the door opening of the dryer. Clean it before each load. A screen blocked by lint can increase drying time.
To clean
1.Open the door and pull the lint screen straight up.
2.Open lint screen.
3.Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove.
4.Close lint screen. Push the lint screen firmly back into place and close the door.
16
