Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to the refrigerator at the main power supply.
Failure to do so could result in electrical shock or personal injury.
To change refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Console to remove bulb.
3.Replace bulb with a
4.Reconnect refrigerator to power supply.
To change crisper light:
1.Disconnect refrigerator from power supply.
2.Pull top of light shield forward until it snaps free.
3.Lower light shield to clear bottom supports.
4.Pull light shield straight out to remove.
5.Replace bulb with a
6.Replace light shield in reverse order.
7.Reconnect refrigerator to power supply.
To change light below ice bin:
1.Disconnect refrigerator from power supply.
2.Push in sides of light shield until it snaps free.
3.Replace bulb with a
4.Replace light shield.
5.Reconnect refrigerator to power supply.
isper light
Light below ice bin
18
