To change light behind quick freeze
compartment (on some models):
1.Disconnect refrigerator from power supply.
2.Lift and secure quick freeze compartment door.
3.Remove light shield by pulling top forward.
4.Replace bulb with a
5.Replace light shield.
6.Reconnect refrigerator to power supply.
To change dispenser area light:
1.Disconnect refrigerator from power supply.
2.Reach through dispenser area to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
Removing the base grille
To remove the grille:
1.Open both doors.
2.Pull base grille forward to release the support tabs from the metal clips.
3.Do not remove Tech Sheet fastened behind the grille.
To replace the grille:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close the doors.
See cleaning instructions for defrost pan and condenser coils on page 22.
Light below
’ ice bin
Light behind quick freeze compartment
Dispenser area light
Condenser coils
I
Defrost | |
grille | |
L pan |
|
support |
|
tabs |
|
19