![Installing it properly](/images/new-backgrounds/75200/7520013x1.webp)
Installing it properly
1.Allow 1.25 cm (l/2 inch) space on each side and at the top of the refrigerator for ease of installation.
2.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
3.The refrigerator can be flush against the back wall.
4.Make sure the ice maker water supply has been connected. Refer to Installation Instructions.
Leveling it
Your refrigerator has 2 front leveling
1.Remove base grille. (See page 19.)
2.To raise front, turn screw clockwise.
3.To lower front, turn screw counterclock- wise.
4.Check with level.
5.Replace base grille. (See page 19.)
Use a screw- driver to adjust