Whirlpool 3ED25DQ, 8ED22DQ Changing the control, Settings, Recommended, Condition Reason Control

3.Give the refrigerator time to cool down completely before adding food. This may take several hours.

The settings indicated above should be correct for normal, household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. If you need to adjust these settings, see “Changing the control settings” below.

NOTE: The Automatic Exterior Moisture control continuously guards against moisture build-up on the outside of your refrigerator cabinet. This control does not have to be set or adjusted.

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

		RECOMMENDED
CONDITION:	REASON:	CONTROL	SElTINGS:
		Refrigerator	Freezer

Refrigerator	l	Door	opened			often
section	l	Large	amount			of food		added	4	A
too warm	l	Room temperature					too warm
Freezer	l	Door	opened			often
section	l	Large	amount			of food		added	3	C
too warm	*Very		cold room temperature
		(can’t	cycle		often		enough)
Refrigerator	@Controls			not	set correctly				2	B
section		for your		conditions

too cold

Ice not	l	Heavy ice usage
made fast	every		cold room temperature
enough		(can’t	cycle often enough)
Both	l	Door	opened	often
sections	l	Large	amount	of food added
too warm	*Very		warm or very cold room
		temperatures

3C

4B