Whirlpool 910 Series warranty Setting the Controls, Selecting a wash cycle

Setting the Controls

Selecting a wash cycle

Press a Cycle pad. (Normal Wash, Light Wash and Rinse Only share the same pad.) Turn the Cycle Control knob to the desired cycle.

			A “ • ” shows what each cycle includes					CYCLE
					MAIN			TIME
CYCLE			WASH	RINSE	WASH	RINSE	DRY	(Minutes)
	POTS-N-PANS
		Double heated
	POTS-N-PANS
		washes for cleaning
		of cooked-on or	•	•	•	•	•
		baked-on foods.						88†

•The water heats to 140°F (60°C) in both washes.

•The water heats to 140°F (60°C) in the final rinse.

NORMAL WASH
	Double wash for
NORMAL	normal, everyday
	soiled loads. (The
WASH
	Energy Guide label	•	•	•	•	72†
is based on this cycle.)

•Select Hi-Temp Wash to heat water to 140°F (60°C) in the main wash.

•The water heats to 140°F (60°C) in the final rinse.

LIGHT WASH
	Single wash for
LIGHT
WASH	pre-rinsed or lightly
	soiled loads.
• Select Hi-Temp Wash to heat water		•	•	•	62†
to 140°F (60°C) in the main wash.

•The water heats to 140°F (60°C) in the final rinse.

†Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown. The Cycle Control knob does not move while water is being heated.

12