![UsingRinseAgentDispenser](/images/new-backgrounds/75800/7580039x1.webp)
UsingRinseAgentDispenser
Rinse agent dispenser
Keep the rinse agent dispenser filled with a liquid rinse agent such as
For best drying results, check the
dispenser periodically to see if it needs refilling.
To check dispenser
some models
Keep rinse agent dispenser filled f
The center of the Fill Indicator Cap WIIIbe clear when dispenser needs refilling. An “E”will also be visible inside the dispenser when the cap is removed and the dispenser is empty.
On some models:
1.Press the flexible clear top of the Fill Indicator Cap to draw rinse agent into cap.
NOTE: You may need to press cap two or three times to remove all of the air bubbles from the cap.
2.When rinse agent does not show in cap, even after pressing flexible cap several times, dispenser needs refilling.
To fill dispenser
The dispenser will hold 6 ounces of rinse agent. Under normal conditions, this will last about 3 months. You do not have to wait until the dispenser IS empty to refill it, but do not overfill it.
Make sure the dishwasher door is fully open before removing the Fill Indicator Cap. Do not fill past the smallest opening in the lower part of the dispenser. If you overfill, excess rinse agent can come out. This will not harm the dishwasher, but could cause
NOTE: Because your dishwasher is designed to use a liquid rinse agent, you do not need to use a solid or
RRegistered Trademark of Bencklser Consumer Products, Inc.
20