Operating Instructions
Continued
The drawings in this book may vary slightly from your dishwasher model. They are designed to show the different features of all the models covered by this book.
NOTE: Your model may not include all the features shown.
Beforestartingyourdishwasher
1. Properly load the top and bottom racks, and silverware basket.
2. Spin the Upper and Lower Spray Arms to make sure nothing will stop them from turning freely.
3. Add detergent. See page 19.
4. Check rinse agent dispenser. See page 20.
5. Push door firmly when closing and it will automatically latch.
6. Run hot water at sink nearest dishwasher until it is hot. Turn it off.
Startingyourdishwasher
1. Press the CYCLE pad once to display the cycle and options. Skip to step 4 if you want to use the cycle and options shown on the display.
2. Press the CYCLE pad until the cycle you want is shown on the display. The time remaining in the cycle and “MINUTES” are shown on the drsplay. Each press of the CYCLE pad ad- vances the display to the next cycle.
3. Press the OPTIONS pad until the option you want IS shown on the drsplay. Each press of the OPTIONS pad advances the display to the next option.
4. Press the START/FAVORITE pad.
NOTE: Cycle, options, and favonte selectrons are erased by a power farlure.
4
