Whirlpool ACE082XR0 Exhaust Control on some models, Style 1-Coolonly air conditioner settings

Exhaust Control (on some models)

Set the Exhaust control to CLOSED for maximum continuous cooling. The Exhaust control set OPEN allows you to draw stale or smoky air from the room.

■OPEN—to exhaust room air to the outside

■CLOSED—to circulate room air

CLOSED

OPEN

NOTE: The Exhaust control will function only when the Fan Control is operating.

Style 1—Cool only air conditioner settings

Fan Control

Set the Fan control to the desired setting. When the air conditioner is operating at Low Cool, High Cool, or Turbo Cool, the fan circulates air continuously.

■Turbo Cool—for maximum cooling

■High Cool—for normal cooling

■Low Cool—for sleeping comfort

■Fan Only—to move air continuously without cooling NOTE: Fan runs on Turbo speed only.

Style 2—Heat/Cool Air Conditioner Settings (on some models)

Fan Control

Set the Fan control to the desired setting. When the air conditioner is operating at Low Cool, High Cool, Turbo Cool, Low Heat or Turbo Heat, the fan circulates air continuously.

■Low Heat—for reduced heating

■Turbo Heat—for maximum heating

■Turbo Cool—for maximum cooling

■High Cool—for normal cooling

■Low Cool—for sleeping comfort

■Fan Only—to move air continuously without cooling or heating

NOTE: Fan runs on Turbo speed only.

■Power Saver—fan runs only when cooling is needed.

Since the fan does not circulate the room air continuously, less energy is used but the room air is not circulated as often. Use Power Saver when you are asleep or away from home.

NOTE: Fan runs on Low speed only.

Thermostat

Turn the THERMOSTAT control to a mid-setting. Adjust the air conditioner's performance by turning the Thermostat control clockwise for maximum cooling. For less cooling, turn the THERMOSTAT control counterclockwise. Experiment to find the setting that suits you best.

Thermostat

Turn the THERMOSTAT control to a mid-setting. Adjust the air conditioner’s performance by turning the Thermostat control clockwise for maximum cooling. For less cooling, turn the THERMOSTAT control counterclockwise. Experiment to find the setting that suits you best.

For heating, turn the THERMOSTAT control counterclockwise. The electric strip heater is activated when the Fan control is set to a heat setting.

NOTE: Your air conditioner is not designed to be used as a primary heat source. It is intended for supplemental heating only.

10