Whirlpool ACE082XR0 manual Installation Requirements, Tools and Parts, Location Requirements

Models: ACE082XR0

1 28
Download 28 pages 60.61 Kb
Page 3
Image 3
IMPORTANT SAFETY INSTRUCTIONS
Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:

Do not use an extension cord.

Unplug air conditioner before servicing.

Use two or more people to move and install air conditioner.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

Flat-blade and Phillips

Scissors

 

screwdrivers

Tape measure

 

Level

Drill and ³⁄₃₂" or smaller bit

 

 

Through-the-wall installation

In addition to the tools listed above, the following tools are needed for through-the-wall installation.

Saw

1" (2.5 cm) or thicker

Wood preservative

 

lumber

 

#8 x ¹⁄₂" wood screws (6)

Caulk

 

 

Parts supplied (on some models)

Check that all parts are included in parts package.

The location should provide:

Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.

NOTE: Do not use an extension cord.

Free movement of air in room to be cooled.

A large enough opening for the air conditioner.

Adequate wall support for weight of air conditioner. Air conditioner weighs between 80 and 110 lbs (36.3 to 49.9 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers.

A

A. Cabinet louvers

A

C D E F

G

A. Foam seals (2)

B.Window-lock bracket

C.#6 - 32 x ¹⁄₄" pan-head screws (2)

D.#8 x ³⁄₄" round-head screws (3)

B

H

E. #10 - 12 x ³⁄₈" pan-head Phillips screws (3)

F.#8 - 18 x ³⁄₈" pan-head Phillips screws (6)

G. Top channel

H. Side curtains (2)

Window installation (on some models)

Window opening measurements:

Width: 27" (68.6 cm) minimum to 40" (101.6 cm) maximum.

Height: 16¹⁄₄" (41.3 cm) minimum.

A

NOTE: Installation parts are supplied for double-hung windows up to 40" (101.6 cm) wide. A special Wide Window Kit is available from your dealer or service center. See “Accessories.”

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Check the location where air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.

B

A. 27" (68.6 cm) minimum to 40" (101.6 cm) maximum B. 16¹⁄₄" (41.3 cm) minimum

3

Page 3
Image 3
Whirlpool ACE082XR0 manual Installation Requirements, Tools and Parts, Location Requirements, Important Safety Instructions