Whirlpool AEE2000, ACE3411, ACE3211, ACE3200, ACE2400, ACE2200 Installation, Gas Supply Connection

Models: ACE2200 ACE2400 AEE2000 ACE3200 ACE3211 ACE3411

1 15
Download 15 pages 17.02 Kb
Page 3
Image 3
Installation

!WARNING

Fire or Explosion Hazard

Do not allow children to use or play with the range; keep children away while range is in use.

Keep the range surroundings free of flammable material, gasoline and other vapors or flammable liquids.

Do not get too close to the flame produced by the burners or wear loose clothing; your clothes may ignite if contact by open flames.

Do not use your range to warm rooms, because this is dangerous.

Failure to do so can result in death, fire or explosion.

Installation

EXHAUST DEVICE

61 cm Gas Supply Connection min.

Proper installation is your responsibility. A qualified technician or Service technician must install this range.

• Remove all packing material and put the range accessories in their places.

• Select the best location in your kitchen for your range, protected from wind and with enough space to open the oven door.

• Do not install cabinetry directly above the range.

If you will install an exhaust device, put it at 61 cm minimum from the range cooktop.

If your range has a power cord, it must be installed near an electrical wall outlet.

Do not use extension cords or multiple outlets.

Gas Supply Connection

GAS SUPPLY CONNECTIONGAS SUPPLY CONNECTION

1

To connect the range, use the material shown in the bottom figure.

Gas inlet tube fitting

3/8" copper pipe with

3/8" copper pipe with

Gas regulator

5/8" flared type nut.

5/8" flared type nut. Necessary

 

 

 

length to reach the gas.

 

 

3/8" shut off valve

 

 

3/8" brass pipe fitting

 

 

3/8" brass pipe fitting

 

 

Hex. adapter

Hex. adapter

 

 

 

 

 

 

The material shown is not provided with the range

3

Page 3
Image 3
Whirlpool AEE2000, ACE3411, ACE3211, ACE3200, ACE2400, ACE2200 manual Installation, Gas Supply Connection