Whirlpool ACQ052PK0 Removing air conditioner from window, Excessive Weight Hazard

Models: ACQ052PK0

1 44
Download 44 pages 61.52 Kb
Page 14
Image 14
Removing air conditioner from window
Turn air conditioner off and disconnect power cord.

!WARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

6. Carefully lift air conditioner and slide it into open window. Make sure bottom guide of air conditioner drops into L bracket. Be sure that air conditioner is centered in window from right to left.

window frame

seal

 

upper guide

 

 

about

 

1/4"

bottom guide

(6.3 mm)

 

Lbracket

7.Lower window sash down behind upper guide of air conditioner. Make sure the air conditioner tilts to the back as shown.

L bracket

short

screw

sash seal

wood screw

10. Fasten L bracket using a short screw.

Removing air conditioner from window

!WARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

1.

2. Remove L brackets and screws installed through top and bottom of guide panels. Save for reinstallation.

3. Close guide panels.

4. Raise window sash and carefully tilt air conditioner backward to drain any condensate water in base.

5. Lift air conditioner from window and remove sash seal from between windows.

8. Extend guide panels to fill window opening. Use 4 wood screws.

9. Insert sash seal behind top of lower window sash and against glass of upper window.

14

Page 14
Image 14
Whirlpool ACQ052PK0 installation instructions Removing air conditioner from window, Excessive Weight Hazard