RCA 24F502TDV manual Connections to other equipment, Unit

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to the unit is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with a built-in digital surround sound as follows, you can enjoy the various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, MPEG decoder or etc as shown below.

Rear of the unit		Front
		Speaker
unit	Subwoofer	(Right)
Front
Speaker
(Left)
Coaxial Digital Audio
Output
Coaxial digital cord
(not supplied)	Center Speaker
To Coaxial Digital
Audio Input
Surround		Surround
Speaker (Left)		Speaker
AV Amplifier with built-in digital surround		(Right)
decoder as listed above

*Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

NOTES:

•When you make the connection above, on the AV Amplifier, do not set DOLBY DIGITAL to DOLBY DIGITAL, or MPEG to MPEG “ON”. If you do, a loud noise will emit from the speakers possibly causing damage to your hearing or to the speakers.

•This unit does not apply to DTS audio out. There will be no sound output if connected to AV amplifier with built- in DTS decoder.

13

5V40101C [E] P12-17 13 15`03`06, 10:58