RCA 24F502TDV manual TV operation, Channel +

MUTE

SLEEP 120

TV operation (continued)

CHANNEL +/–

Press and release CH + or –. The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory. See pages 22 and 23 “Memorizing channels”.

CALL

Press DISPLAY/CALL to display the current information on the screen. Press DISPLAY/CALL again to clear the call display.

•Channel number or VIDEO mode

•Stereo or SAP (second audio program) audio status

•Audio output status

TV/VCR

8 : 47AM MONCH 125 STEREO SAP

00 : 00 : 00 SP

To listen through the headphones, insert the plug to your headphones (not supplied) equipped with a 1/8 inch mini plug into the PHONES jack on the front of the TV/VCR/DVD. The sound from the TV/VCR/DVD speaker is muted.

20

QUICK VIEW

This button allows you to go back to the last channel selected by pressing QUICK VIEW. Press QUICK VIEW again to return to the last channel you were watching.

MUTE

Press MUTE to switch off the sound. The unit’s sound will be silenced and “MUTE” will briefly appear on the screen. The sound can be switched back on by pressing this button again or one of the VOL + or –.

SLEEP

To set the TV/VCR/DVD to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count down 10 minutes for each press of the SLEEP button (120, 110, ...10, 0). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is

operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to 0.

5V40101C [E] P18-21 20 15`03`06, 10:59