RCA 24F502TDV manual Duplicating a video tape, Connection with second Video recorder, Pause/Still

Duplicating a video tape

Duplicating a video tape

If you connect the TV/VCR/DVD to another VCR or camcorder, you can duplicate a previously recorded tape. Make all connections before turning on the power.

1 Load a blank cassette tape with the erase prevention tab intact into the recording unit.

Load a previously recorded tape into the playback VCR or CAMCORDER.

2 Press SPEED to select the desired tape speed SP or SLP.

It is recommended that you set the speed to the SP mode on the recording unit for best results.

3 Press INPUT SELECT to select AUDIO/VIDEO input position. “LINE” will appear on the screen.

Connection with second Video recorder

4 Press REC/OTR on the recording unit, then press

PAUSE/STILL.

5 Press the PLAY button on the playback VCR or CAMCORDER, then press the PAUSE/STILL button.

6 Release the recording pause and the playback still simultaneously to begin the duplicating process.

Connection with Video camera

Playback VCR Playback Camcorder

To AV jack

To VIDEO OUT To AUDIO (R) OUT

To AUDIO (L) OUT

Recording unit

Recording unit

AUDIO/VIDEO cord (not supplied)

	To AUDIO (R) IN
To VIDEO IN	To AUDIO (L) IN

AUDIO/VIDEO cord (not supplied)

	To AUDIO (R) IN
To VIDEO IN	To AUDIO (L) IN

AUDIO/VIDEO cord (not supplied)

For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.

41

5V40101C [E] P40-41 41 15`03`06, 11:01