10.Slide the air conditioner onto the support platform. Be sure the unit side channel butts against the vertical edge of the window frame. Watch out for the sharp metal fins on the front and rear coils.

NOTE: If unit side channel does not fit securely, remove air conditioner and readjust leveling bolt.

11.Using the existing clearance holes in the air conditioner’s bottom bar as guides, drill two ‘/a” holes through the window channel frame. Install two self-threading screws through the clearance holes and into these holes. Tighten the screws securely. The air conditioner should be firmly anchored to the window channel frame. Be sure your air conditioner does not fall out during installation.

12.Slide the inside window sash closed. Make sure the vertical edge of the inside window sash is pressed firmly against the side of the unit cabinet. Cut remaining adhesive back foam seal equal to the width of the window opening. Remove the backing and apply to the top inside edge of the window frame.

13.Install the speed clips on the top and bottom inside edges of the window to provide locking.

14.Insert the appropriate plastic foam seal between the inside window sash and the outside window.

15.Place the top retainer on the top edge of the filler panel. Then place the bottom edge of the filler panel into the groove of the bottom retainer which is mounted on the air conditioner. The filler panel may be trimmed with a knife or scissors to fit the window height.

16.Slide the sliders upward making sure the filler panel aligns in the sliders.

17.With the sliders up against the top re- tainer, drill ‘/enhole through the window frame using the existing clearance hole in the slider as a guide. Install the self- threading screw in the hole and tighten securely. Repeat for the other slider.

18.Check all seals and plug all air leaks around the air conditioner with a suitable weather-proof sealing compound.

Excessive Weight Hazard

Use 2 or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

SUpport platform Window channel frame

Channel

Foam seal

Page 11
Image 11
Whirlpool ACSl02XE, ACS072XE warranty SUpport platform Window channel frame Channel Foam seal

ACS072XE, ACSl02XE specifications

The Whirlpool ACS072XE and ACSL02XE are two advanced air conditioning units designed to provide efficient cooling solutions for residential and commercial environments. Both models are equipped with state-of-the-art technologies that enhance comfort and energy efficiency, making them ideal choices for consumers looking to reduce their energy bills while maintaining a pleasant indoor atmosphere.

One of the standout features of the ACS072XE is its powerful cooling capacity, which allows it to effectively cool large spaces quickly. With a robust BTU rating, this model is well-suited for living rooms, offices, or any area where rapid temperature reduction is desirable. The ACSL02XE, while slightly smaller, is equally impressive and tailored for rooms where compact cooling is needed without compromising on performance.

Both models employ inverter technology, which is a key factor in their energy efficiency. Inverter air conditioners can adjust their compressor speed based on the cooling demand, meaning they use less electricity than traditional units that constantly turn on and off. This not only leads to savings on energy bills but also contributes to a more stable and comfortable temperature throughout the day.

Whirlpool has also integrated advanced filtration systems in both models. These filters are designed to effectively trap dust, allergens, and other particulate matter from the air, improving the overall indoor air quality. This feature is particularly beneficial for allergy sufferers and those living in urban areas where air pollution is a concern.

In terms of user convenience, both the ACS072XE and ACSL02XE come with smart technology capabilities. They can be easily controlled via mobile apps, allowing users to adjust settings, set timers, and even monitor energy consumption from the palm of their hand. This connectivity is part of Whirlpool’s commitment to providing modern, user-friendly solutions for climate control.

Additionally, the designs of both models are sleek and modern, ensuring they can fit seamlessly into various interior aesthetics. Their compact size allows for easy installation, whether in a window or as a split system, accommodating different preferences and building types.

Overall, the Whirlpool ACS072XE and ACSL02XE stand out in the air conditioning market thanks to their powerful cooling capabilities, energy efficiency through inverter technology, advanced filtration systems, and smart connectivity features. These models not only meet the cooling needs of consumers but do so while promoting a healthier indoor environment, making them worthy contenders for those seeking reliable and innovative air conditioning solutions.