Olllng the fan motor
Electrlcal Shock Hazard
Disconnect power cord from receptacle before oiling motor. Fallure to do so could result In personal InJury.
1.Oil the fan motor per instructions on the motor. To add oil, pull out the oil hole plug at each end of the motor (see diagram). An
2.Replace the plug to keep dirt from motor bearings.
3.Reinstall the unit in cabinet after performing maintenance. Refer to the “Installationinstruc- tions” section for your unit.
Energy saving tips
l
l
l
l
l
l
l
Improve home insulation (seal doors, windows, and close fireplace flue).
Close blinds or drapes on sunny side of house; add window awnings.
Keep air filter clean. Don’t block air flow with drapes or furniture.
Ventilate attic (high temperature levels add to normal cooling load).
Try not to use heat producing appliances during the honest part of the day. Turn lights, radios, televisions, and other appliances off when not needed.
Keep heat registers and cool air returns closed or blocked off so cooled air won’t escape.
Use a vent fan in areas where cooking, laundry, or bathing is done to pull out extra heat and moisture near its source.
14
