Whirlpool ACU072XE installation instructions upthrough7.5, 115volt modelswith amperes

Electrical Requirements

Continued

Fire Hazard

Do not use an extension cord.

Doing so can result in death, fire, or electrical shock.

Electrical Shock Hazard

Plug into a grounded three prong outlet. Do not remove ground prong.

Do not use an adapter.

Do not fuse neutral or grounding circuit.

Do not use air conditioner with front panel removed.

Failure to follow these instructions can result in death, electrical shock, or serious injury.

Sprang

groundlng

Plug

115volt modelswith amperes

upthrough7.5 -

Receptacle wiring

Receptacle wiring should be a minimum of 14 gauge. Use copper wire only. It is the responsibility of the consumer to provide proper and adequate receptacle wiring, installed by a qualified electrician. Observe National Electrical Code and all local governing codes and ordinances.

Electrical requirements

A 115 volt (103.5 min., 126.5 max.), 60 Hz, AC only, 15 ampere fused electrical supply is required (time delay fuse or time delay circuit breaker required). It is required that a separate circuit, serving only this air conditioner, be provided.

Electrical connection

Electrical ground is required on this air conditioner.

Recommended grounding method

For your personal safety, this air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3prong grounding-type wall receptacle, grounded in accordance with the National Electrical Code (ANSVNFPA 70 - latest edition) and local codes and ordinances. If a mating wall receptacle is not available, it is the responsibility of the customer to have a properly grounded

3-prong wall receptacle installed by a qualified electrician.

4