Whirlpool AD0402XM0 manual Setting the Water Level Control

1.Turn humidistat to UNIT OFF,then plug in the dehumidifier.

Your dehumidifier has an automatic humidi-

’stat. Turn humidistat control left towards DRYEST for normal operation. Set at number 5 or 6 to start. Adjust later, if necessary

When humidity in the room increases, the dehumidifier automatically starts. When the humidity decreases to the selected level, the dehumidifier automatically stops.

1 [

3.If you need more dehumidification, turn control to a higher number. Unit will run continuously at DRYESTsetting. If you need less, set on a lower number.

4.Stop the unit manually by turning the control to

UNIT OFF

Setting the Water Level Control

All models except the 12 pint (5.6 L)capacity model have an adjustable water level control. The water level control can be set in two positions to automatically turn off the unit when the pan is full. This prevents the danger of overflow.

Pan must be in proper position for water level control switch to work.

NORMAL FILL -

4 WATER LEVEL	Water level adjustment set on the
	left side indentation. The water
	pan and	water will weigh ap-
	proximately	16 Ibs. (7.2 kg].
	MAXIMUM	FILL -

Move the water level control to the raised area on the right side. The water pan and water will weigh approximately 24 Ibs. (10.8

kg).

The water level control switch will automatically turn off the dehumidifier atthe fill level you selected. You may need to loosen the screw to move the water level adjustment. Retighten screw when adjusted.

6