EN9
DESCRIPTION OF DISPLAY
A
B C D
E
I H G F
A. Display of heating elements active during the various functions
B. Time management symbols: timer, cooking duration, cooking end time, current time
C. Information regarding selected functions
D. Automatic PIZZA/BREAD function selected
E. Indication of oven door closed during the automatic cleaning cycle (not available on this model)
F. Oven inside temperature
G. Pyrolysis function (not available on this model)
H. Browning
I. Special functions: Defrost, Keep Warm, Rising, Eco Forced Air
STARTING THE OVEN - SETTING THE LANGUAGE
At the first switch on of the oven, display shows ENGLISH. Turn the “Browse” knob until the desired
language is displayed then press the button 3 to confirm.
SETTING THE CURRENT TIME
After setting the language, the current time must be set. The two hour digits flash on the display.
1. Turn the “Browse” knob to display the correct hour.
2. Press the button 3 to confirm; the two minute digits flash on the display.
3. Turn the “Browse” knob to display the correct minutes.
4. Press button 3 to confirm.
To change the current time, for example following a power outage, see the next section (SETTINGS).
SELECTING COOKING FUNCTIONS
1. Turn the “Functions” knob to the required function: the cooking settings appear on the display.
2. If the parameters shown are those required, press 3. To modify them, proceed as indicated below.
SETTING THE TEMPERATURE/GRILL POWER
To modify the temperature or grill power, proceed as follows:
1. Turn the “Browse” knob to display the required value.
2. Press the button 3 to confirm.
The oven automatically confirms the selection 10 seconds after the last operation.