SETTING END OF COOKING TIME /START DELAYED

IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA.

N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly longer than stated in the cooking table.

The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only be done once cooking time has been set.

After setting cooking time, the display shows the end of cooking time (for example 15:45) and the symbol flashes.

To delay the end of cooking time, and thus also the cooking start time, proceed as follows:

1.Turn the “Browse” knob to display the time you wish cooking to end (for example 16:00).

2.Confirm the selected value by pressing button 3 : the two dots of end of cooking time flash, indicating that the setting has been made correctly.

3.The oven will automatically delay the start of cooking so as to finish cooking at the set time.

TIMER

This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta. The maximum time which can be set is 23 hours and 59 minutes.

1.With the “Functions” knob at zero, turn the “Browse” knob to display the desired time.

2.Press button 3 to start the countdown. When the set time has elapsed, the display will show “END” and an acoustic signal will sound. To mute the acoustic signal, press button 3 (the time of day appears on the display).

SELECTING SPECIAL FUNCTIONS

Turn the “Functions” knob indicator to the symbol to access a submenu containing special functions. To browse, select and start one of these functions, proceed as follows:

1.Turn the “Functions” knob to symbol : the display shows “ DEFROST” along with this function’s corresponding symbol.

2.Turn the “Browse” knob to scroll the list of functions: DEFROST, KEEP WARM, RISING, ECO FORCED AIR.

3.Press button 3 to confirm.

BROWNING

At the end of cooking, with certain functions, the display indicates the possibility of extra browning. This function can only be used when cooking time has been set.

At the end of cooking time, the display shows: “PRESS TO BROWN”. Press button 3 , and the oven starts a 5 minute browning cycle. This function can be selected consecutively a maximum of twice.

EN11

Page 13
Image 13
Whirlpool AKZ 562 manual Setting END of Cooking Time /START Delayed, Timer, Selecting Special Functions, Browning