STARTING THE OVEN - SETTING LANGUAGE
At the first switch on of the oven, the display shows: ENGLISH
Turn the “Browse” knob until the desired language is displayed, then press the button 
to confirm.
SETTING TIME
After setting the language, the time must be set on the clock. The two hour digits flash on the display.
1.Turn the “Browse” knob to display the correct hour.
2.Press the button 
to confirm; the two minute digits flash on the display.
3.Turn the “Browse” knob to display the correct minutes.
4.Press button 
to confirm.
To change the time, for example following a power cut, see the next paragraph (SETTINGS).
SELECTING COOKING FUNCTIONS
1.Turn the “Functions” knob to the desired function: the cooking settings are shown on the display.
2.If the values shown are those desired, press 
. To change them, proceed as indicated below.
SETTING THE TEMPERATURE/OUTPUT OF THE GRILL
To change the temperature or output of the grill, proceed as follows:
1.Turn the “Browse” knob to display the desired value.
2.Press button 
to confirm.
FAST PREHEATING
1.Turn the “Functions” knob to the symbol 
to select the fast preheating function.
2.Confirm by pressing 
: the settings are shown on the display.
3.If the proposed temperature is that desired, press button 
. To change the temperature, proceed as described in previous paragraphs. The message PRE appears on the display. When the set temperature is reached, the corresponding value (e.g. 200°C) appears on the display and the acoustic signal
sounds. At the end of preheating, the oven automatically selects the conventional function 
. At this point food can be placed in the oven for cooking.
4.If you wish to set a different cooking function, turn the “Functions” knob and select the desired function.
EN10
