Whirlpool AKZM 6570 Acoustic signal, Brightness, Automatic Oven Cleaning, Key-Lock

Acoustic signal

To activate or deactivate the acoustic signal, proceed as follows:

1.Turn the “Browse” knob to display “SOUND”.

2.Press to access the setting (ON/OFF).

3.Turn the “Browse” knob to select the desired setting and confirm by pressing button .

Brightness

To change the display brightness, proceed as follows:

1.Turn the “Browse” knob to display “BRIGHTNESS”.

2.Press button : number 1 appears on the display.

3.Turn the “Browse” knob to increase or decrease brightness and confirm by pressing .

AUTOMATIC OVEN CLEANING

For the description of this function, see the chapter CLEANING and the functions table at page 14.

To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:

1.Turn the “Functions” knob to symbol : the word PYRO appears on the display.

2.Press button to confirm your choice and start the pyro-cleaning cycle.

To select ECO pyro-cleaning, turn the “Browse” knob: the word ECO appears bottom right on the display. Press button to start the shorter programme.

During pyro-cleaning, the oven door is automatically locked and the symbol appears on the display. The door remains locked at the end of the cleaning cycle: “COOL” appears on the display, indicating the oven is still cooling down. When the oven cools to a safe temperature, the symbol switches off and the display shows “END”.

N.B.: the automatic door lock control procedure fails to execute properly, the symbol appears on the display. If, on the other hand, the door remains closed due to a fault in the locking system, and “DOOR LATCHED” appear on the display. In this case, contact the After-sales Service.

KEY-LOCK

This function can be used to lock the buttons and knobs on the control panel.

To activate it, press and at the same time for at least 3 seconds. When activated, the functions associated with the buttons are locked and the display shows a key symbol. This function can also be activated during cooking. To deactivate it, repeat the above procedure. When the key-lock function is activated, the oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously selected function will have to be set again.

EN13