INSTALLATION REQUIREMENTS
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Electrical Connection
To properly install your air purifier, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.
■The air purifier should be connected to a 115 V, 60 Hz, 15- or
■The use of a
LocationRequirements
A
A. 6" (15.2 cm) minimum clearance
■You will need a level surface at least 6" (15.2 cm) from heat sources such as ranges or heaters.
■Do not block air openings or place air cleaner on a soft surface such as a bed or sofa.
■Operate indoors only.
AIR PURIFIER USE
Starting/Stopping Your Air Purifier
NOTE: Before operating the air purifier, record the date of installation on the HEPA filter. Under normal conditions, the HEPA filter should be replaced annually, and the
A 
B |
| Change |
|
| HEPAFilter | D | |
|
|
| |
C |
| Change |
|
|
| E | |
|
|
| |
|
| Reset | F |
|
|
| |
A. Low fan speed | C. High fan speed | E. | |
B. Medium fan | D. HEPA filter | light |
|
speed | indicator light | F. Filter reset button | |
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
1.Plug into a grounded 3 prong outlet.
NOTE: Both filter indicator lights will flash once during a self- test when the air purifier is turned on or after a power interruption.
2.Turn the control knob to the large fan icon (High), the middle fan icon (Medium) or the small fan icon (Low) to select the desired fan speed.
3.Turn the control knob to Off to turn off the air purifier.
4
