Operating Your Air
Conditioner
In order to obtain the best possible results from your air conditioner, it is important that you operate it properly. This section will tell you how to do just that.
, Starting your air conditioner
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or electrical shock.
NOTE: Make sure air conditioner System Control is set to Off before plugging in the unit.
1.Set the Exhaust Control to Closed for best cooling results.
2.Set the System Control to the desired setting.
LO COOL ...........for sleeping comfort MED COOL ..........for normal cooling HI COOL ..........for maximum cooling FAN ONLY......for air circulation only
Electrical Shock Hazard
Plug into a grounded
Do not remove ground prong.
Failure to follow these instructions
can result in death or electrical shock.
3.Turn the Thermostat Control to the mid (number 6) setting. You can adjust the air conditioner’s cooling performance by resetting the Thermostat Control to a higher number for maximum cooling. Lower the thermostat for less cooling.
You will need to experiment to find the setting which suits you best.
When lowering the Thermostat Control setting, the compressor (motor) may shut off.
NOTE: If you turn your air conditioner off or if the compressor shuts off, wait at least two minutes before turning it back on or you may blow a fuse or trip a circuit breaker.
5
