Whirlpool AS12 manual Airflow direction control

Operation instructions

Airflow direction control

Airflow direction control

Vertical airflow is automatically adjusted to a certain angle

in accordance with the operation mode after turning on the unit.

ON

OFF

Operation mode	Direction of airflow
COOLING, DRY	horizontal
*HEATING,	downward
FAN ONLY

The direction of airflow can be also adjusted to your own requirement by pressing the 5 "SWING" button of the

remote controller.

	W	IN	G
S

FAN

T

I

M

E

R

ON

T

IM

E

R

OF

F

CLOCK

th

sense

MODE

	W	IN	G
S

		E	E	P
S	L

CK

LO

*Heating mode is only available for heat pump models.

Vertical airflow control (with the remote controller)

Using remote controller to set various angles of flow or specific angle as you like.

Swinging airflow

Pressing "SWING" button once, the vertical adjustment louver will swing up and down automatically.

Desired direction airflow

Pressing the "SWING" button again when the louvers swing to a suitable angle as desired.

Horizontal airflow control (with hands)

Turning the control rods of the horizontal adjustment louvers to change horizontal air flow as shown.

Note: The shape of the unit may look different from that of the air conditioner you have selected.

control rods of horizontal adjustment louvers

Do not turn the vertical adjustment louvers manually, otherwise malfunction may occur. If that happens, turn off the unit first and cut off the power supply, then restore power supply again.

It is better not to let the vertical adjustment louver tilt downward for a long time at COOLING or DRY mode to prevent condensed water from dripping.

8