TIMER

This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta. The maximum time which can be set is 23 hours and 59 minutes.

1.With the “Functions” knob at zero, turn the “Browse” knob to display the desired time.

2.Press button to start the countdown. When the set time has elapsed, the display will show “END”

and an acoustic signal will sound. To mute the acoustic signal, press button (the time of day appears on the display).

KEY-LOCK

This function can be used to lock the buttons and knobs on the control panel.

To activate it, press and at the same time for at least 3 seconds. When activated, the functions associated with the buttons are locked and the display shows a key symbol. This function can also be activated during cooking. To deactivate it, repeat the above procedure. When the key-lock function is activated, the oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously selected function will have to be set again.

SELECTING SPECIAL FUNCTIONS

Turn the “Functions” knob indicator to the symbol to access a submenu containing special functions. To browse, select and start one of these functions, proceed as follows:

1.Turn the “Functions” knob to symbol : the display shows “ DEFROST” along with this function’s corresponding symbol.

2.Turn the “Browse” knob to scroll the list of functions: DEFROST, KEEP WARM, RISING, SLOW COOKING MEAT, SLOW COOKING FISH.

3.Press button to confirm.

BROWNING

At the end of cooking, with certain functions, the display indicates the possibility of browning. This function can only be used when cooking time has been set.

At the end of cooking time, the display shows: “PRESS TO BROWN”. Press button, and the oven starts a 5 minute browning cycle. This function can be selected consecutively a maximum of twice.

EN33

Page 13
Image 13
Whirlpool BMVE 8200 manuel dutilisation Timer, Key-Lock, Selecting Special Functions, Browning