CommonDishwashingProblems

Spotting and filming

Hard water

Fill detergent dispensers to capacity. Use dishwasher detergent with highest available phosphorus content. May be necessary to install water softener.

To remove spots and film, try a vinegar rinse...

I, Wash and rinse load as usual. Use Air Dry Option.

2.Remove all metal items.

3.Put 2 cups (500 mL) white vinegar in a container on the bottom rack.

4.Run dishwasher through a complete washing cycle.

Water is not hot enough

Water temperature should be at least 14O.F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting.

Not enough detergent, or improper detergent

Use more dishwasher detergent. Use detergent with highest available phosphorus con-

tent.. .especially with hard water.

“Old” detergent

Use only fresh dishwasher detergent. Store tightly closed container in cool, dry place. Discard old detergent. Do not fill dispensers until ready to start dishwasher.

Improper loading

Make sure dishes and glassware are loaded so spray reaches all surfaces and items drain properly. Do not overload. Do not nest items.

Make sure large items do not block spray from reaching detergent dispensers.

No rinse aid

Does the rinse aid dispenser need filling? See instructions on page 10.

AIR DRY Setting used

Drying without heat may result In some spotting of glasses and silver.

Small particles deposited on items

Spray arm not rotating freely

Check spray arm to make sure it turns freely after loading. Be sure a utensil has not prevented its turning.

“Old” detergent

Use only fresh dishwasher detergent. Store tightly closed container In cool, dry place. Discard old detergent. Do not fill dispensers until ready to start dishwasher.

Not enough detergent, or improper detergent

Use more dishwasher detergent. Use detergent with highest available phosphorus content.. especially with hard water.

Water is not hot enough

Water temperature should be at least 140°F (60’C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting.

Water pressure may be low, dishwasher is not filling properly

If water pressure is low, do not use water for other purposes while dishwasher is running (to assure correct fills).

Dishes not dry

Water is not hot enough

Water temperature should be at least 14O’F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting

Improper loading

Make sure dishes and glassware are loaded so spray reaches all surfaces and items drain properly. Do not overload. Do not nest items.

No rinse aid

Does the rinse aid dispenser need filling? See instructions on page 10.

AIR DRY Setting used

Allow more time when using Air Dry Option, or use Heat Dry Option. Plastic items may need towel drying.

Black marks on dishes

Aluminum utensils rubbing against items during washing

Use care in loading aluminum utensils,

especially any lightweight foil container. Place so they do not touch dishes. Remove black marks with plastic scouring pad and a mild abrasive cleanser.

Chipping or breaking glassware Improper loading

Do not overload. Load glasses in the top rack only. Load between prongs, not over them. Glasses loaded over prongs will not be supported and may chip or break.

Page 13
Image 13
Whirlpool DU52l6XW manual CommonDishwashingProblems, Not enough detergent, or improper detergent, Improper loading

DU52l6XW specifications

The Whirlpool DU52L6XW is a cutting-edge dishwasher that sets a new standard for performance and efficiency in modern kitchens. This model boasts a range of impressive features designed to simplify the dishwashing process while ensuring sparkling-clean results.

One of the standout characteristics of the DU52L6XW is its intuitive design, which includes a spacious interior that can accommodate up to 12 table settings. This means that families and individuals alike can enjoy the convenience of cleaning large loads in one go. The adjustable upper rack provides additional flexibility, allowing users to maximize the available space according to their needs.

The DU52L6XW employs advanced cleaning technologies that elevate its dishwashing capabilities. The Triple Filtration System ensures that food particles and debris are effectively removed from the wash water, delivering consistently clean dishes. The Precision Clean feature utilizes sensors to detect soil levels on dishes, adjusting the wash cycle accordingly to optimize water and energy usage.

Another notable aspect of this model is its noise level, which operates at a whisper-quiet 49 decibels. This feature is particularly appealing for open-concept homes where kitchen noise can disrupt the living space. With its sound insulation technologies, users can run the dishwasher during dinner parties or late-night gatherings without worrying about disturbing conversations.

For those concerned about energy efficiency, the Whirlpool DU52L6XW is Energy Star certified, ensuring that it meets strict energy-saving guidelines. This not only translates to lower utility bills but also makes it an environmentally friendly choice for consumers aiming to reduce their carbon footprint.

The user-friendly control panel features a variety of wash cycle options, including Heavy, Normal, and Eco modes, among others. This versatility allows users to choose the most suitable setting based on the type of load they're washing, whether it's heavily soiled pots and pans or delicate glassware.

In addition to its performance capabilities, the sleek, stainless-steel exterior of the Whirlpool DU52L6XW adds a touch of modern elegance to any kitchen decor. Its fingerprint-resistant finish keeps it looking pristine, reducing the need for constant cleaning.

Overall, the Whirlpool DU52L6XW stands out as a reliable and efficient dishwasher that combines innovative technology with user-friendly features. With its spacious interior, advanced cleaning systems, energy efficiency, and stylish design, it is an ideal choice for anyone seeking a high-performance appliance in their kitchen.