Whirlpool DU9450XT manual Control pad lock-outfeature, The beeping sound

Control pad lock-out feature

This feature lets you lock-out the function of the control pads (except to CANCEL a cycle that is running or to pause during a cycle in progress).

\

E!Yuim

1.Press and hold the CYCLE pad until the CLEAN signal light flashes.

2.Release the pad.

m

3.The CLEAN signal light will turn off to show that the control pads are locked-out.

To cancel the lock-out feature:

b

E!m

1.Press and hold the CYCLE pad until the CLEAN signal light turns on and stays on.

2.Release the pad.

m

3.The CLEAN signal light will turn off to show that the control pads are no longer locked out.

The beeping sound

Each time a control pad is pressed, a single “beep” sound is made. A double beep means one of the extra features was selected or the wrong control pad was used.

To turn off the beep:

1.Press and hold the DELAY pad until the CLEAN signal light flashes.

2.Release the pad.

3.The CLEAN signal light will turn off to show that the beep is turned off.

To turn the beep back on:

1.Press and hold the DELAY pad until the CLEAN signal light turns on and stays on.

2.Release the pad.

3.The CLEAN signal light will turn off to show that the beep has been turned on.

NOTE: All extra feature selections are can- celled by a power failure.

12