Install properly.. .
I.Allow %” ( 2 cm) space on each side and at tc for ease of installation.
2.The refrrgerator back can be flush against the wall.
3.If the refrigerator is to be against a wall, you might want to leave enough space so the door can be opened wider.
Remove sales labels.. .
Remove the Consumer Buy Guide label and other InsIde labels before using the refrigerator Any glue left can be taken off with rubbing alcohol
Clean it.. .
Clean your refrigerator before using It See clean- lng InstructIons on page 9
Plug it in...
Level refrigerator-freezer.. .
Front Roller
Right to Boise;
Lett to Lower
I, Remove base grille [see page 8 )
2.To raise front, turn each screw to the right.
3.To lower front, turn each screw to the left.
4.Check with level.
rong
w Plug
Retrigerotor
Power Cord
Recommended
Grounding Method
A 115 Volt, 60 Hz., AC only, 15 or 20 ampere fused electrical supply IS required. It is recommended that a separate clrcult serving only this appliance be provided.
Do not use an extension cord. Use a receptacle which cannot be turned off with a switch or pull chain. See individual electrical requirements and
grounding instruction sheet in your literature package.
4
