Whirlpool ED25DQXDB00 Removing the meat drawer, Cover, Adjusting the meat drawer temperature

To reinstall shelf:

1.Hold shelf at front and back.

2.Tilt front of shelf up to a 45” angle to track.

3.Insert both rear shelf slides into upper channel of track.

4.Lower front of shelf to a level position.

NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.

ml Upper channel

Insert rear shelf slides Into upper channel oi back.

Removing the meat drawer

To remove the meat drawer:

1.Slide meat drawer straight out to the stop.

2.Lift the front slightly.

3.Slide out the rest of the way.

4.Replace in reverse order.

To remove the cover:

1.Remove meat drawer and crisper.

2.Lift front of cover off supports.

3.Lift cover out by pulling up and out.

To replace the cover:

1.Fit back of cover into notch supports on walls of refrigerator.

2.Lower front into place.

3.Replace meat drawer and crisper.

and cover

Pull out to the stop, Ilft the front, and pull agaln.

Adjusting the meat drawer temperature

Cold air from the freezer flows into the meat drawer. This helps keep the meat drawer colder than the rest of the refrigerator for better storage of meats.

Slide the control from side to side to let more or less cold air through.

I	Use the control to
	adjust	the	temperature
K		meat	drawer.

11