Whirlpool ED22PW, ED25PB Removing the tall-bottleretainer, Adjusting the refrigerator shelves

Removing the tall-bottle retainer

The tall-bottle retainer fits onto any door bin in your refrigerator. The retainer helps to hold tall-bottles in place when opening and closing the refrigerator door.

To remove tall-bottle retainer:

1.Grasp center of retainer.

2.Pull up and off of bin.

To replace tall-bottle retainer:

1. Position retainer above desired door bin.

2. Gently push retainer down onto bin.

Notch

3. Make sure both side notches sit firmly against bin.

Adjusting the refrigerator shelves

Adjust shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove the shelves:

1.Remove items from the shelf.

2.Tilt shelf up at front.

3.Lii shelf up at back.

4.Pull shelf straight out.

To replace the shelves:

1.Guide the rear shelf hooks into the slots in the shelf supports on the back liner wall.

2.Tilt front of shelf up until hooks drop into slots.

3.Lower front of shelf to a level position.

Using the egg bin

The egg bin has two pieces -the lid and the bin. Use the egg bin to hold one, two or three dozen eggs.

To hold one dozen eggs:

Place a dozen eggs (in or out of carton) in the bin and cover with the lid.

To hold two dozen eggs:

Place two dozen eggs loose in the bin and cover with the lid.

To hold three dozen eggs:

Place two dozen eggs loose in the bin. Invert the lid and place it on the bin. Put a dozen eggs, in their carton, on top of the lid.

Be careful when

handling glass items.

Lid

Bin

10