Whirlpool ED22HP, ED25PB, ED22PB, ED22PW To change crisper light, To change light below ice bin

Models: ED22HP ED22PW ED22PB ED25PB

1 28
Download 28 pages 14.06 Kb
Page 19
Image 19
To change crisper light:

To change crisper light:

1.Disconnect refrigerator from power supply.

2.Pull top of light shield forward until it snaps free.

3.Lower light shield to clear bottom supports.

4.Pull light shield straight out to remove.

6.Replace bulb with a 40-watt appliance bulb.

6.Replace light shield in reverse order.

7.Reconnect refrigerator to power supply.

To change light below ice bin:

1.Disconnect refrigerator from power supply.

2.Push in sides of light shield until it snaps free.

3.Replace bulb with a 40-watt appliance bulb.

4.Replace light shield.

5.Reconnect refrigerator to power supply.

To change upper freezer light (on some models):

1.Disconnect refrigerator from power SUPPly.

2.Lift top of light shield up and pull shield

Out.

3.Replace with a 40-watt appliance bulb.

4.Place shield over bulb and snap shield into place.

5.Reconnect refrigerator to power supply.

To change dispenser area light:

1.Disconnect refrigerator from power supply.

2.Reach through dispenser area to remove bulb.

3.Replace with a heavy-duty 1O-watt bulb, which can be purchased from your Whirlpool dealer.

4.Reconnect refrigerator to power supply.

NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.

risper light

Light below ice bin

\

I Upper f&ezer light

19

Page 19
Image 19
Whirlpool ED22HP To change crisper light, To change light below ice bin, To change upper freezer light on some models