Whirlpool ED25PB Changing the control, settings, Condition, Freezer section too warm, Reason

Models: ED22HP ED22PW ED22PB ED25PB

1 28
Download 28 pages 14.06 Kb
Page 8
Image 8
Changing the control

3.Give the refrigerator time to cool down completely before adding food. This may take several hours.

The settings indicated above should be correct for normal, household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. lf you need to adjust these settings, see “Changing the control settings” below.

NOTE: The Automatic Exteriir Moisture control continuousty guards against moisture build-up on the outside of your refrigerator cabinet. This control does not have to be set or adjusted.

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number, 1-800-253-l 301.

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

CONDITION:

Refrigerator section too warm

Freezer section too warm

I

Refrigerator section too cold

Ice not made fast enough

Both sections too warm

REASON:

l Door opened often

l Large amount of food added l Room temoerature too warm l Door opened often

l Large amount of food added l Very cokf room temperature (can’t cycle often enough)

l Controls not set correctly for your conditions

l Heavy ice usage

l Very coM room temperature

(can’t cycle often enough) l Door opened often

l Large amount of food added

l Very warm or very cold room temperatures

RECOMMENDED CONTROL SElTlNGS: I

Refrigerator 4

FreezerA

Refrigerator 3

FreezerC

Refrigerator 2

FreezerEl

Refrigerator 3

FreezerC

Refrigerator 4

FreezerB

I

Page 8
Image 8
Whirlpool ED25PB Changing the control, settings, Condition, Freezer section too warm, Reason, RECOMMENDED CONTROL SElTlNGS