Whirlpool ED26MK manual Removing the freezer shelves, Removing the freezer basket, Ice cube trays

Models: ED26MK

1 16
Download 16 pages 47.72 Kb
Page 7
Image 7
Removing the freezer shelves...

Removing the freezer shelves...

Lilt the Front

Then the Back

I, Lift front slightly.

2.Lift back off supports.

3.Replace in reverse order.

Removing the freezer basket.. .

For proper arr movement, keep the freezer basket in place when the refrigerator is operating

To remove the basket: 1, Slide out to the stops.

2.Lift the front to clear the stops.

3.Slide out the rest of the way.

To replace the basket:

1, Place baskets on the slides.

2.Make sure the wire stops clear the front of the slides

3.Slide basket in.

Ice cube trays.. .

To remove ice:

1.Hold tray at both ends.

2.Slightly twist.

Changing the light bulbs.. .

Before removing the light shield for cleaning or for

replacing the bulb, unplug the refrigerator. Use

opplionce bulbs on/y

Pull Off the Dial;

Pull Out at the Bottom

If cubes are not used, they may shrink. The moving cold arr starts a slow evaporation. The longer cubes are stored, the smaller they get.

light blubs behind refrigemtor and freezer control consoles:

1.Pull control knob straight off.

2.Pull bottom of control panel straight out.

3.Lift top of panel off supports.

4.Replace with a 40-watt appliance bulb.

5.Replace panel in reverse order.

light bulb behind crisper and meat pan: 1, Remove crisper, meat pan and covers.

2.Bulb is on the back wall of refrigerator

3.Replace with a 40-watt appliance bulb.

4.Replace covers, meat pan and crisper.

Removing the base grille.. .

1, Open the doors.

2. Pull grille outwards as

shown

To

replace:

3. Do not remove Tech

sheet fastened behind grille

I,

Line

up grille support tabs with metal clips.

 

 

2. Push firmly to snap Into place.

 

 

3

Close

the doors.

Page 7
Image 7
Whirlpool ED26MK manual Removing the freezer shelves, Removing the freezer basket, Ice cube trays, Changing the light bulbs